Symphony

  • Mac Audio Optimization Guide

    When streaming audio through an interface connected to your Mac, there are many factors that can cause the audio to have artifacts such as pops or clicks, stutters, or dropouts as you play or record. Use this guide to optimize your Mac computer to reduce the chances of this from happening. In Apple Menu > […]

  • SoundGrid FAQ for Symphony I/O Mk II when equipped with Waves SoundGrid option card

    Q: Which Symphony I/O Modules may be installed in the Symphony I/O MkII SoundGrid? A: The 8×8 MkII, 16×16 MkII, and 8 Mic Pre IO Modules may be installed. The 2x6SE, as well as previously released MkI IO Modules, are not currently compatible with Symphony I/O MkII SoundGrid. Q: Can the Pro Tools HD Option card […]

  • HDX or HD Native is not showing up in Pro Tools HD Playback Engine

    If you have an Apogee Symphony I/O or Symphony I/O MkII (or a Rosetta/16x with X-HD card) and you’re using it in Pro Tools HD mode with an HDX card, HD Native card, or HD Native Thunderbolt and you’re not able to see HDX/HD Native as a possible selection in the Pro Tools Playback Engine, […]

  • How to set up Symphony I/O MkII for Surround Monitoring (5.1, 7.1, 9.1, 11.1)

    How to connect and configure a Surround Speaker Setup   When using Symphony with a surround speaker setup, the first set of outputs can be configured as speaker outputs suitable for connection to a 5.1, 7.1, 9.1, or 11.1 speaker system, depending on the analog outputs you have available. With this configuration, turning the Output […]

  • How to set up Speaker Sets for Symphony I/O MkII