GiO

Do Apogee USB products (Groove, ONE, Duet, GiO, MiC, JAM, Quartet) work with the latest MacBook?

Question:

Do Apogee’s current USB products (Groove, ONE for Mac, ONE for iPad & Mac, Duet 2, Duet for iPad & Mac, GiO, MiC, MiC 96k, JAM, JAM 96k, Quartet) work with the 2015/2016 12″ MacBook?

 

Answer:

Yes. The 2015/2016 12″ MacBook includes a USB-C port. Since USB-C uses a different size port and connector than traditional USB ‘Type A’, you will need to use an Apple USB-C to USB adapter to connect any USB device with a traditional ‘Type A’ connection, such as Apogee’s line of USB audio interfaces, to this port.

Apogee’s line of USB audio interfaces are also fully compatible with the 2016 MacBook Pro, as outlined in this post.

 

*It should be noted that Apogee’s Thunderbolt products will NOT work with the 2015/2016 12″ MacBook.

 

Click for information about compatibility with Apogee’s Thunderbolt products and the 2015/2016 12″ MacBook.

Click for information about compatibility with Apogee’s Thunderbolt products and the 2016 MacBook Pro.

Click for more information on the differences between USB-C ports and Thunderbolt 3 ports.

 

 

 

 

Do Apogee USB products (Groove, ONE, Duet, GiO, MiC, JAM, Quartet) work with the 2016 MacBook Pro?

Question:

Do Apogee’s current USB products (Groove, ONE for Mac, ONE for iPad & Mac, Duet 2, Duet for iPad & Mac, GiO, MiC, MiC 96k, JAM, JAM 96k, Quartet) work with the 2016 MacBook Pro?

 

Answer:

Yes. The 2016 MacBook Pro with Touch Bar includes Thunderbolt 3 ports, which can also be used to connect USB devices. Since Thunderbolt 3 and USB-C use the same size ports and cables, you will need to use an Apple USB-C to USB adapter to connect any USB device with a traditional ‘Type A’ connection, such as Apogee’s line of USB audio interfaces, to these ports.

Apogee’s line of USB audio interfaces are also fully compatible with the 2015/2016 12″ MacBook, as outlined in this post.

 

*It should be noted that Apogee’s Thunderbolt products will NOT work with the 2015/2016 12″ MacBook.

 

Click for information about compatibility with Apogee’s Thunderbolt products and the 2016 MacBook Pro.

Click for information about compatibility with Apogee’s Thunderbolt products and the 2015/2016 12″ MacBook.

Click for more information on the differences between USB-C ports and Thunderbolt 3 ports.

Are Apogee products compatible with Pro Tools 12?

Yes!  The following products have been tested and are fully compatible with Pro Tools 12 (every version of 12):

  • JAM
  • JAM 96k
  • MiC
  • MiC 96k
  • Groove
  • GiO
  • ONE for Mac (old and new versions)
  • ONE for iPad & Mac
  • Duet FireWire
  • Duet 2
  • Duet for iPad & Mac
  • Quartet for iPad & Mac
  • Ensemble FireWire
  • Ensemble Thunderbolt
  • Symphony I/O (USB, Symphony, and Pro Tools HD modes)
  • Symphony I/O MkII (Thunderbolt and Pro Tools HD)
  • Symphony 64 PCIe
  • Symphony 64 | ThunderBridge
  • X-Symphony equipped X-Series and Rosetta Series Converters
  • X-HD equipped X-Series and Rosetta Series Converters

Is it ok to leave my Apogee device plugged in and connected to Mac?

Yes, it is perfectly fine for any of our devices to remain plugged in and connected to your Mac (or iOS device). There is no harm in the device remaining powered up while you’re not using it.

Signal not showing up where it’s supposed to and routing incorrect in Pro Tools

If your signal isn’t showing up correctly in Pro Tools, coming out of Pro Tools to the desired outputs, or if the routing isn’t showing up as expected, there are a few things to check. Look below for the section that applies to the Apogee product you’re using:

 

JAM, JAM 96k, MiC, MiC 96k, Groove

  • Confirm that the device you’re using is selected as the ‘Playback Engine’ in Pro Tools by going to the the ‘Setup’ dropdown menu in Pro Tools and selecting ‘Playback Engine’. Make sure your Apogee device is selected in the ‘Playback Engine’ dropdown menu at the top of the window. If you are using JAM or MiC, you will first need to create a ‘Pro Tools Aggregate I/O’ and then you will select ‘Pro Tools Aggregate I/O’ as your ‘Playback Engine’. Click here for setting up JAM for Pro Tools.  Click here for setting up MiC for Pro Tools.
  • You may need to reset the I/O paths in Pro Tools. This is a very common thing. Click on the ‘Setup’ menu in Pro Tools and select ‘I/O’. Once the I/O Setup opens, select all of the channels in the left-hand column and hit ‘Delete’ on your keyboard.  After you’ve deleted them, click the ‘Default’ button in the lower part of the screen. Follow the same steps for each tab in I/O Setup. Once you have gone through these steps in each tab, click the ‘OK’ button to confirm changes and exit.

 

ONE (every model), GiO, Duet (every model), Quartet, Ensemble (every model)

  • Confirm that you are using the correct inputs/outputs on your device. Click here for instructions on how to setup ONE.  Click here for instructions on how to setup Duet.  Click here for instructions on how to setup Quartet.
  • Confirm that the device you’re using is selected as the ‘Playback Engine’ in Pro Tools by going to the the ‘Setup’ dropdown menu in Pro Tools and selecting ‘Playback Engine’. Make sure your Apogee device is selected in the ‘Playback Engine’ dropdown menu at the top of the window.
  • Launch ‘Apogee Maestro’ and click the ‘Reset Routing’ button in both the ‘Input Routing’ and ‘Output Routing’ tabs. If you’re using an Avid Duet or Avid Quartet, you will use ‘Pro Tools I/O Control’ app instead of Maestro. Click here if you need to download the Pro Tools I/O Control app for Avid Duet or Quartet.
  • You may need to reset the I/O paths in Pro Tools. This is a very common thing. Click on the ‘Setup’ menu in Pro Tools and select ‘I/O’. Once the I/O Setup opens, select all of the channels in the left-hand column and hit ‘Delete’ on your keyboard.  After you’ve deleted them, click the ‘Default’ button in the lower part of the screen. Follow the same steps for each tab in I/O Setup. Once you have gone through these steps in each tab, click the ‘OK’ button to confirm changes and exit.

Symphony I/O, Symphony I/O MkII, AD16x, DA16x, Rosetta 200, Rosetta 800

 

 

Why are the input and output level/volume popup indicators not showing up?

Several Apogee products have pop-up level indicator graphics that will appear on the desktop of your Mac when the input and output levels are adjusted from the device or from the Mac’s keyboard volume buttons.

 

If the pop-ups aren’t appearing, there are a few things to check:

Launch ‘Apogee Maestro 2’ from your Applications folder, click on the ‘Apogee Maestro 2’ drop-down desktop menu and select ‘Preferences’. Confirm that the ‘Display pop-ups’ checkbox is checked. If you don’t see this option, then pop-ups aren’t available for the product you’re using.

 

If you’ve confirmed that the ‘Display pop-ups’ checkbox is checked and you’re still not getting the pop-ups, try the following:

 

– Unplug/replug your Apogee device

– Restart your Mac

– Launch ‘Activity Monitor’ (Applications> Utilities> ‘Activity Monitor’), click the ‘View’ drop-down desktop menu and select ‘All Processes’. Type ‘apogeepopup’ in the searchbar in the upper right-side corner of Activity Monitor. Once you see ‘ApogeePopup’ displayed in the list, highlight it and force-quit the process by clicking the ‘X’ button in the upper left-side corner of Activity Monitor. Wait a few seconds and you should see the popups again after adjusting input/output level.

 

*Note for Duet Firewire and Ensemble Firewire customers*

There was a known issue with pop-ups not working for Duet Firewire and Ensemble Firewire when using any version of Mac OS 10.8. It is recommended that you use either a version of Mac OS earlier than 10.8 or later than 10.9.

 

 

How can I verify that the buttons on my GiO are transmitting data?

With the GiOConfig application installed you can determine whether the buttons on the GiO are transmitting data. Double-click  and open GiOconfig from the Mac’s Applications folder. Under the Expression pedal curve setting you’ll see a Value: and grey rectangular bar. When pressing a button on the GiO the rectangular bar should turn blue and a Value of 127 displayed. This would indicate that GiO is transmitting MIDI data to the Mac and can be checked with all the buttons of the GiO.

GiOConfig button check

http://www.apogeedigital.com/support/gio

Gain Staging – How to set proper levels with your Apogee product and recording software

Use the following steps to set input and output levels on your Apogee interface. 

Before launching your recording software:

1. Turn down the speaker/headphone output level of your Apogee interface.

2. Connect your audio source to your Apogee interface. Make sure to use the proper inputs.

• If you’re using a microphone, plug the microphone into the XLR input.

• If you’re using a guitar, bass, or other high impedance instruments, plug them into the 1/4″ instrument input.

• If you’re using an external mic-pre or another piece of line-level gear, use the XLR inputs.

Quick Tip: Some keyboards and synths can be plugged into either the Instrument or XLR inputs. You might have to experiment with what sounds better.
 

3. Launch Apogee Maestro and go to the input tab. Make the appropriate selection in the Analog Level drop-down menu for the input channel you are using.

• Microphone (Mic) – depending on the Apogee interface you are using, you would choose Ext Mic/Ext Mic 48v (ONE) or Mic (Duet, Quartet, Ensemble, SymphonyI/O with MicPre module). You will need to engage the 48v button for if you’re using a mic that requires phantom power.

• Instrument (Inst) – Guitar/Bass/some keyboards

• Line Level (+4dBu/-10dBV for balanced/unbalanced connections) – This setting is used when connecting external microphone preamps and other line-level gear.

NOTE: If you have the ONE, a line-input is accommodated by choosing Ext Mic and turning the input gain all the way down.
 

4. Set the input gain of your Apogee interface.

There are two ways you can adjust your input gain:

• By adjusting the input software encoder in Maestro

• By turning the physical knob (encoder) on your Apogee interface (make sure you’ve set the knob to control the input channel and not the output level. See your User’s Guide for more information on setting this).

Quick Tip: Ideally, the level in the input meter should be as high as you can get it without hitting an “over”. If you see red in the meter, you know you need to turn the input gain down. In some cases you may need to adjust the output of the audio source you are using. You may need to move your microphone closer to the sound source or further away. You may need to turn the level of your guitar or keyboard up or down.
 

Launch your recording software, create an audio track, and put the track into input or record mode. It is a good idea to leave the fader of the track you are recording and any Master Fader for the mix set at their default setting.

5. Adjust the output level of your Apogee interface.

• Gradually increase the output level of your Apogee interface so you can hear what your input source sounds like in the speakers or headphones.

• After you get the output set to a comfortable listening level, listen for any distortion in the input audio.

• If the audio sounds bad, you may have something set wrong. Go through steps 2, 3, and 4 to trouble-shoot the problem.

Note: Two common issues are that the sound is too quiet or that it’s distorted. It may be a simple case of needing to turn the input gain up and the output level down or the input gain down and the output level up.

Grounding Noise

The direct-coupled design of USB and Firewire audio interfaces can be susceptible to grounding anomalies that are difficult to discern. This can manifest in a variety of audible ways including hum, artifacts, and noises which can modulate with activity from the mouse, hard drive, wireless network, printer activity, or other functions of the computer.

One way to begin troubleshooting is to monitor the outputs of the audio interface with headphones. If the noise isn’t audible then it’s likely that a grounding issue exists.

If you look at the components of a computer based recording system, grounding noise can emanate from a multitude of sources. A few examples of these sources include:

  • Input (Instrument, line-level device, etc.)
  • Audio cables
  • Audio interface power supply (if applicable)
  • USB/Firewire cable
  • Computer’s AC
  • Attached peripherals/devices
  • Powered monitors or amp

A grounding problem could also be caused by the power, AC circuits, and power plugs of the room, or even the building you are in.

To troubleshoot the issue you’ll want to systematically remove, add or replace components in the system until the device (or devices) introducing the grounding issue has been discovered.

  • Because variables can exist within the same space from one circuit or AC outlet to another. Experiment moving devices around to different AC outlets. The preferred setup in a audio/computer system is for the power to be provided from the same AC circuit/outlet.
  • If a MacBook is being utilized, typically the AC power adapter (Magsafe) includes a  3-prong power cable and 2-prong adapter. Try utilizing the 2-prong adapter (North America). Does running the MacBook on batteries (=floating) solve the problem?
  • Utilize balanced cables (1/4″ TRS or XLR) when possible particularly when the audio interface is equipped with balanced inputs or outputs. Balanced circuitry is less prone to ground loops as the ground does not carry signal.
  • When unbalanced cables (RCA, 1/8″ or 1/4″ TS) are utilized keep the length of the cable to a minimum, under 10 feet (3 m). Longer lengths can amplify and exacerbate grounding noise.
  • Separate AC power wiring from audio cables.
  • Ground lifting the AC of a device may resolve the problem. This should be done with extreme CAUTION, as grounding exists for safety. You’ll want to consult with the manufacturer of the device about the implications of configuring the power in this manner. In North America this can be accomplished cheaply with a 3-prong to 2-prong ground lift adapter attached to the AC plug. In other countries a power strip without a ground may suffice.
  • Depending upon the severity of the issue another product may have to be implemented to resolve it. This could be a DI with a ground lift option (for input sources like a keyboard, guitar, etc.), a transformer based solution like those offered by Jensen and EBTECH, power conditioning or regulating device.

If you have questions, are unable to resolve this or any issue contact Apogee Support for assistance.

http://www.apogeedigital.com/contact-support.php

GiO LEDs not showing Color, GiO not working

To remedy non-recognition of GiO or GiO LED’s, or Gio not being seen with Logic

1. Quit recording application.
2. Reset GiO using GiO config application
3. Open Activity Monitor > Force Quit MIDIServer Process

Relaunch application to verify recognition. If issue persists the following files may need to be deleted and emptied from trash:

Logic X
User > Library > Preferences
– com.apple.logic10.LSSharedFileList.plist
– com.apple.logic10.plist

Logic 9
User > Library > Preferences
– com.apple.logic.pro.cs
– com.apple.logic.LSSharedFileList.plist
– com.apple.logic.plist

GarageBand
User > Library > Preferences
– com.apple.garageband.cs
– com.apple.garageband.LSSharedFileList.plist
– com.apple.garageband.plist