Duet 2 (USB): Compatibility

Do Apogee USB products (Groove, ONE, Duet, GiO, MiC, JAM, Quartet) work with the latest MacBook?

Question:

Do Apogee’s current USB products (Groove, ONE for Mac, ONE for iPad & Mac, Duet 2, Duet for iPad & Mac, GiO, MiC, MiC 96k, JAM, JAM 96k, Quartet) work with the 2015/2016 12″ MacBook?

 

Answer:

Yes. The 2015/2016 12″ MacBook includes a USB-C port. Since USB-C uses a different size port and connector than traditional USB ‘Type A’, you will need to use an Apple USB-C to USB adapter to connect any USB device with a traditional ‘Type A’ connection, such as Apogee’s line of USB audio interfaces, to this port.

Apogee’s line of USB audio interfaces are also fully compatible with the 2016 MacBook Pro, as outlined in this post.

 

*It should be noted that Apogee’s Thunderbolt products will NOT work with the 2015/2016 12″ MacBook.

 

Click for information about compatibility with Apogee’s Thunderbolt products and the 2015/2016 12″ MacBook.

Click for information about compatibility with Apogee’s Thunderbolt products and the 2016 MacBook Pro.

Click for more information on the differences between USB-C ports and Thunderbolt 3 ports.

 

 

 

 

Do Apogee USB products (Groove, ONE, Duet, GiO, MiC, JAM, Quartet) work with the 2016 MacBook Pro?

Question:

Do Apogee’s current USB products (Groove, ONE for Mac, ONE for iPad & Mac, Duet 2, Duet for iPad & Mac, GiO, MiC, MiC 96k, JAM, JAM 96k, Quartet) work with the 2016 MacBook Pro?

 

Answer:

Yes. The 2016 MacBook Pro with Touch Bar includes Thunderbolt 3 ports, which can also be used to connect USB devices. Since Thunderbolt 3 and USB-C use the same size ports and cables, you will need to use an Apple USB-C to USB adapter to connect any USB device with a traditional ‘Type A’ connection, such as Apogee’s line of USB audio interfaces, to these ports.

Apogee’s line of USB audio interfaces are also fully compatible with the 2015/2016 12″ MacBook, as outlined in this post.

 

*It should be noted that Apogee’s Thunderbolt products will NOT work with the 2015/2016 12″ MacBook.

 

Click for information about compatibility with Apogee’s Thunderbolt products and the 2016 MacBook Pro.

Click for information about compatibility with Apogee’s Thunderbolt products and the 2015/2016 12″ MacBook.

Click for more information on the differences between USB-C ports and Thunderbolt 3 ports.

Are Apogee products compatible with Pro Tools 12?

Yes!  The following products have been tested and are fully compatible with Pro Tools 12 (every version of 12):

  • JAM
  • JAM 96k
  • MiC
  • MiC 96k
  • Groove
  • GiO
  • ONE for Mac (old and new versions)
  • ONE for iPad & Mac
  • Duet FireWire
  • Duet 2
  • Duet for iPad & Mac
  • Quartet for iPad & Mac
  • Ensemble FireWire
  • Ensemble Thunderbolt
  • Symphony I/O (USB, Symphony, and Pro Tools HD modes)
  • Symphony I/O MkII (Thunderbolt and Pro Tools HD)
  • Symphony 64 PCIe
  • Symphony 64 | ThunderBridge
  • X-Symphony equipped X-Series and Rosetta Series Converters
  • X-HD equipped X-Series and Rosetta Series Converters

Is Duet compatible with Mac OS X El Capitan (10.11)?

Yes! Duet FireWire, Duet 2 and Duet for iPad/Mac are all fully compatible* with Mac OS X El Capitan (10.11 to current).  Please be sure to download and install the latest El Capitan compatible software package for your product from Apogee’s site.

*  Although Duet FireWire is not “officially supported” after OS X 10.10.5, it is still compatible with OS X 10.11 and should work just like it did on OS X 10.10. You can download the latest installer for Duet Firewire and use it on 10.11 even though it says “Mac OS X 10.10 and 10.9 only”.

 

Click to find the latest Duet FireWire Software Installer

Click to find the latest Duet 2 Software Installer

Click to find the latest Duet for iPad/Mac Software Installer

Is Duet compatible with Mac OS X Yosemite (10.10)?

Yes! Duet FireWire, Duet 2 and Duet for iPad/Mac are all fully compatible with Mac OS X Yosemite (10.10 to 10.10.5).  Please be sure to download and install the latest Yosemite compatible software package for your product from Apogee’s site.

 

Click to find the latest Duet FireWire Software Installer

Click to find the latest Duet 2 Software Installer

Click to find the latest Duet for iPad/Mac Software Installer

My Duet 2 shows up as a Duet 1 in Apogee Firmware Updater

The Apogee Firmware Updater application For Duet 2 and Duet for iOS & Mac  assigns a numerical value to each Duet 2 connected to the Mac. I you have only a single Duet 2 connected it assigns the number 1 to it, so you see Duet 1 in the Device Select drop down menu. If you had 3 Duet 2 units connected to the same Mac you would see Duet 1, Duet 2, Duet 3 in the Device Select drop down Menu. We realize this is confusing and plan to change this to be clearer in a future update. For now just go ahead and Update it will be for the Duet 2 not the old Duet 1 Firewire version.

Power Supply Information: Duet 2

The Duet 2 uses a regulated power supply with the following specifications:

  • Input: AC 100-240v, 50-60Hz (same unit can be used in U.S., Europe, and Asia)
  • Output: DC 5V, 2 Amps (2000mA)
  • Barrel Size: 2.1mm inside diameter x 5.5mm outside diameter
  • Center Pin: Positive

WARNING: These specifications do not apply to the Duet for iPad & Mac. Plugging in the wrong power supply can damage the device.

Is Duet compatible with Mac OS X Mavericks (10.9)?

Yes! Duet FireWire, Duet 2 and Duet for iPad/Mac are all fully compatible with Mac OS X Mavericks (10.9 to 10.9.5).  Please be sure to download and install the latest Mavericks compatible software package for your product from Apogee’s site.

 

Click to find the latest Duet FireWire Software Installer

Click to find the latest Duet 2 Software Installer

Click to find the latest Duet for iPad/Mac Software Installer

 

Will Apogee USB interfaces work with USB 3.0 ports on my Mac?

Yes, Apogee interfaces including JAM, JAM 96k, MiC, MiC 96k, GiO, Groove, Duet 2, Duet for iPad & Mac, ONE, ONE for iPad & Mac, Quartet, and Symphony I/O have been tested and work well with USB 3.0 ports.

Note-

Although Symphony I/O works as an audio interface with USB 3.0 ports, you will need to use a USB 2.0 port or a USB hub to run the Symphony I/O firmware updater.

How do I know what version of Maestro is installed on my Mac?

To find out what version of Maestro you have installed:
  • Open Maestro 2 (found in your Mac’s application folder) and click on the “Apogee Maestro 2″ menu in the upper left-hand corner of the desktop menu bar
  • select “About Maestro 2″. This will bring up a window showing you which version you have installed (see example below)